AGILE Series

Main options

Multmedia Card Slot
• Slot for multimedia card for quick and easy copying

Optional field bus communication:
• CM-CAN: CANopen
• CM-PDP-V1: PROFIBUS
• CM232: Modbus ASCII & Modbus RTU for point-to-point connection
• CM485: Modbus ASCII & Modbus RTU via RS485 connection
• CM-DeviceNet: DeviceNet
• CM-EtherCAT®: EtherCAT®
• CM-PROFINET: PROFINET
• CM-Ethernet/IP: Ethernet/IP with one usable port as end-of-line device                                      
• CM-Ethernet/IP-2P: Ethernet/IP with two usable ports (daisy chaining is possible)
• CM-Modbus/TCP: Modbus/TCP with one usable port as end-of-line device
• CM-Modbus/TCP-2P: Modbus/TCP with two usable ports (daisy chaining is possible)
• Ethernet VABus/TCP: VABus/TCP: with one usable port as end-of-line device
• Ethernet VABus/TCP-2P: VABus/TCP: with two usable ports (daisy chaining is possible)

Optional interface for communication to PC
• ASK-USB: Communication to PC via optional communication cable

Optional PC software
• VPlus for Windows operating system with motor setup, terminal monitor
• Actual value window, scope function, parameter storage

Accessories:
• Brake resistors Type BR: The brake resistors offer an inexpensive solution to dissipate generator power that occurs at deceleration. A thermal sensor for the brake resistor protects the resistor from overheating.
• Power choke type LCVS & LCVT: Power choke types LCVS (for single-phase power installation) and LCVT (for three-phase power installation) increase the overvoltage protection of the inverter and increase the system's EMC.
• Power filters type FTV: Depending on the application boundaries, certain EMC levels must be achieved. The power filters are a component to improve EMC behavior in a machine installation.

Degree of protection

IP20 (EN 60529)

Rated speed

0 ... 599 Hz

Certifications

UL508c
STO (EN13849 / EN 61508)

Conformity

CE
EN61800

Power supply & Power range

Power range (AGL402)
0.25 - 11 kW / three-phase 320 V... 530 V / 50 - 60 Hz (± 10%)

Power range (AGL202)
0.12 - 3 kW / single-phase 200 V... 240 V / 50 - 60 Hz (± 10%)
0.25 - 7.5 kW / three-phase 200 V ... 240 V / 50 - 60 Hz (± 10%)

Software features

• Preset values for Bonfiglioli motors to decrease commissioning times
• Flexible assignment of digital inputs and outputs
• Energy Saving function
• Ready to use application macros
• Motor chopper function to increase braking power without brake resistors
• Power failure regulation
• Fault history
• Motor and inverter state memory
• Integrated PLC function with graphic development environment

Hardware features

• Integrated Keypad
• Integrated brake chopper
• Integrated Safe Torque Off function
• DC link connection
• 6 digital inputs, 2 multifunction A/D inputs
• 1 digital output, 1 multifunction I/O
• 1 relay output, 1 multifunction A/D/Pulse output
• Signal supply outputs: +24 V DC, + 10 V DC
+24 V DC input for electronic power supply
• Serial interfaces: RS-232, RS-485 including Modbus support
system bus

Mounting options

• Cabinet mounting for all sizes
• Optional feed-through mounting
• Optional DIN rail mounting frame size 1
• Optional ColdPlate mounting

Motors

• Motor compatibility
• Two types of motors:
• Asynchronous AC motors
• Permanent magnet synchronous (brushless) motors