ACTIVE Series

Main options

DC 24 V power supply output
•EM-IO-01: Expansion for 3 digital inputs, 2 relay outputs, 1 analog input, 1 analog output, system bus connection, DC 24 V power supply output
• EM-IO-02: Expansion for 3 digital inputs, 1 relay output, 1 analog input, 1 analog output, motor-PTC input, system bus connection, DC 24 V power supply output
• EM-IO-03: Expansion for 2 digital inputs, 1 relay output, 1 analog input, 2 analog outputs, motor-PTC input, system bus connection, DC 24 V power supply output
• EM-IO-04: Expansion for 2 digital inputs, 1 digital port (input or output), motor-PTC input, system bus connection, DC 24 V power supply output

Optional encoder & feedback evaluation:
• EM-ENC-01: TTL/HTL encoder input (2 channels), encoder emulation output (2 channels), 1 analog input, system bus connection, DC 5 V power supply output
• EM-ENC-02: TTL/HTL encoder input (2 channels), 1 digital port (input or output), 1 analog input, 1 analog output, system bus connection, DC 5 V power supply output
• EM-ENC-03: TTL/HTL encoder input (2 channels), system bus connection
• EM-ENC-04: TTL/HTL encoder input (3 channels), 1 relay output, 1 analog input, 1 analog output, 24 V power supply output, DC 5 V power supply output
• EM-ENC-05: TTL/HTL encoder input (3 channels), 1 analog input, 1 analog output, system bus connection, 24 V power supply output, DC 5 V power supply output
• EM-RES-01: Resolver input, encoder emulation output (2 channels), 1 analog input, system bus connection
• EM-RES-02: Resolver input, encoder emulation output (3 channels), 1 analog input

Optional PC software
VPlus for Windows with setup, terminal monitor, actual value window, and scope function

Accessories:
• Brake resistors Type BR: The brake resistors offer an inexpensive solution to dissipate generator power that occurs at deceleration. A thermal sensor for the brake resistor protects the resistor from overheating.
• Power choke type LCVS & LCVT: Power choke types LCVS (for single-phase power installation) and LCVT (for three-phase power installation) increase the overvoltage protection of the inverter and increase the system's EMC.
• Power filters type FTV: Depending on the application boundaries, certain EMC levels must be achieved. The power filters are a component to improve EMC behavior in a machine installation.

Degree of protection

IP20 (EN 60529)

Rated speed

0...599 Hz

Certifications

UL508c

Conformity

CE
EN61800

Power supply & Power range

ACT401:
0.55 - 132 kW / three-phase 360 - 480V / 50 - 60 Hz (± 10%)

ACT201:
0.55 - 9.2 kW / single or three-phase 200 - 240V / 50 - 60 Hz (± 10%)

Software features

Main software features
• Programmable reference value channel
• Programmable start and stop characteristics
• Motor potentiometer
• Programmable S curve
• 4 data sets
• Auto startup and commissioning
• Auto reset after failure
• Auto start after power failure
• PL controller
• Programmable logic and timer functions
• Volume flow control
• Bumpless torque/speed changeover,
• Master/slave function with electronic gear,
• Simple positioning function,
• Mechanical brake control free of friction
• Index control
• Intelligent current limits
• Power failure control
• Comprehensive monitoring and protection capabilities
• High speed control
• Functions for lift, crane and winch applications
• 3 different brake management functions.

Hardware features

• Integrated dynamic braking module
• DC link connection
• Standard HTL encoder interface
• Motor temperature monitoring
• Plug-in power terminals (up to 3kW)
• Plug-in and programmable control terminals
• 6 digital input, 1 multifunction input
• 1 digital output, 1 multifunction output
• 1 relay output (changeover contact)

Mounting options

• Cabinet mounting for all sizes
• Optional feed-through mounting
• Optional DIN rail mounting frame size 1
• Optional ColdPlate mounting

Motors

• Motor compatibility
• Two types of motors:
• Asynchronous AC motors
• Permanent magnet synchronous (brushless) motors